Tado smart thermostat – Review

05th July 2022

05th July 2022

Today we’ll be taking a closer look at the Tado smart thermostat, an easy-to-use smart thermostat with some great features including self-learning, a sleek design and a LED interface.

Installation

The installation of the Tado thermostat is straightforward and they make the bold claim in their advertising that it is DIY-friendly, unlike many others, which require an engineer to safely install the thermostat.

To install the thermostat, you simply need to replace your existing room thermostat with the same cabling that’s left behind and install batteries for power. This also applies to the Tado radiator thermostats, which are smart thermostatic radiator valves (TRVS) that can be used in conjunction with the Tado smart thermostat.

Tado is compatible with all gas boiler types, including: Combination, system, and conventional (also known as regular, heat-only or open vent). Unlike other smart thermostats that require power from the previous wiring, the Tado runs solely on batteries, which can last up to 2 years, so you won’t need an engineer to attach this to mains power.

In addition to installing the smart thermostat using existing cabling, the thermostat also requires an internet bridge, which is wired to your router and connects the Tado to the internet. Once the smart thermostat is wired in and hooked to the internet, you’ll be ready to rock and roll. Setting up the thermostat functionality on your smartphone or tablet only takes a few minutes once you have installed the Tado app.

Tado Extension Kit

In some cases, you may need to install the Tado Extension Kit. This kit is required if:

1. You need to replace your existing hot water programmer,
2. You have a wireless thermostat installed, or
3. You have a gas boiler without a thermostat installed.

The Tado Extension Kit is wired directly into your heating system and acts as a wireless receiver for the Tado smart thermostat. However, if you’re just replacing your existing wired room thermostat, you’ll be perfectly fine to use the standard kit that comes with the thermostat.

Compatibility

The Tado is compatible with almost all heating systems including combination, system, and conventional boilers.

As well as gas boilers, the Tado thermostat also supports underfloor systems and air/ground source heat pumps. If you’re still unsure whether the Tado will be compatible with your boiler, our Hometree Gas Safe Engineers can double check your home’s heating set up to make sure the Tado is compatible.

Features of the Tado Thermostat

Design

05th July 2022

The Tado, unlike the Nest’s futuristic circular design, is simply a white plastic square with an LED display. Despite being basic in appearance, the Tado is still a good looking device due to its bright white LEDs. If you are looking for a thermostat that’s a little less retro, and a little more “new kid on the block”, the Nest may be your best bet due to its metallic futuristic design and bright display.

Zoning

It’s quite rare to find heating setups that allow you to control multiple rooms separately without having to install individual room thermostats. Tado, on the other hand, allows separate room temperature controls as long as you have a smart radiator thermostat in each room and one extension kit installed.

05th July 2022

You don’t need a smart thermostat to be installed to control the Tado radiator thermostats, all you need is the app and one or more radiator thermostat installed to set your preferred radiator settings individually.

If you decide not to individually set up each room with a radiator or smart thermostat, the Tado will only control the hot water being sent to all radiators. Therefore, if you wish to switch off some radiators and keep others on, you’ll either have to set your existing TRVs (thermostatic radiator valve) or automate it further using smart Tado radiator thermostats.

Controls & configuration

The physical button at the bottom right of the thermostat is used to wake up the thermostat and show your current set temperature, whereas the up and down arrows are touch-sensitive toggles to increase and decrease temperatures. The combination of both physical and touch-sensitive buttons is slightly confusing, and we’re not entirely sure why the thermostat isn’t completely touch-controlled.

What saves the thermostat is its mobile app, which is intuitive and easy to use when monitoring your home’s as well as individual room temperatures, including any alterations to temperature settings and schedules.

Geolocation

Once you have completed the thermostat installation and WiFi setup, you can set up the geolocation (also known as geofencing) feature available with this thermostat. The Tado app uses your location services to set up an exact geofence radius around your home rather than using an automatic range. This feature uses your home’s radius to track whether you’re home or away, to control your heating and switch it on or off. For example, if you’re on your way back from work and enter the geofence, your heating will start to kick in. On the flip side, if you’re leaving the house and on your way to work, your heating will switch off as soon as you leave the geofence. Geofencing is a great feature if you’d like to avoid leaving your heating switched on and see savings on your energy bills.

05th July 2022